Before you start to use the AutoCAD Modify commands, you need to know something about selecting objects. All of the Modify commands require that you make one or more object selections. AutoCAD has a whole range of tools which are designed to help you select just the objects you need. This tutorial is designed to demonstrate the use of many of the selection options. As with so many aspects of AutoCAD, developing a good working knowledge of these options can drastically improve your drawing speed and efficiency.


submitted: 5 years and 3520 days ago

Tags:basicsmodifyobjectsoptionsselections

0 comment(s) | view tutorial | Views: 248

AutoCAD drawings are rarely completed simply by drawing lines, circles etc. Most likely you will need to Modify these basic drawing objects in some way in order to create the image you need. AutoCAD provides a whole range of modify tools such as Move, Copy, Rotate and Mirror. As you can see, the command names are easily understandable. However, the way these commands work is not always obvious. This tutorial is designed to show you how all of the Modify commands work.


submitted: 5 years and 3520 days ago

Tags:basicscommandscopymirrormodifyingmoveobjectsrotate

0 comment(s) | view tutorial | Views: 268

Although Bryce does have some 3D modelling tools, they are a little basic. Also, building accurate 3D models in Bryce is difficult. If you need to build an accurate 3D model, you're much better off using an application specifically designed for this purpose such as AutoCAD. Models built in AutoCAD can easily be imported into Bryce where they can be given an appropriate setting. The bonus is that Bryce has a much better renderer than AutoCAD and much better control over materials.


submitted: 5 years and 3520 days ago

Tags:autocadbryceexportingimportingmaterials

0 comment(s) | view tutorial | Views: 289

To enter distances, you have been shown Absolute, Relative and Polar Co-ordinates. Now you will be shown two more ways to tell AutoCAD where the locate the point you are drawing to.


submitted: 5 years and 3520 days ago

Tags:distancesentryobjectstracking

0 comment(s) | view tutorial | Views: 211